DAIER Tower Packing Engineering Assistant
Packing selection · Volume & weight · Preliminary engineering report
Pingxiang Daier Separation Tech Co., Ltd. · Since 2009 · Build 1.1.1
This tool contains catalog-confirmed tower-packing models and published reference parameters from an approved DAIER factory source. Automatic mode screens only the material-family and packing-structure direction; it does not claim an exact hydraulic optimum. Manual mode compares only products within the same published catalog series. Published values are not normalized across different series, materials or test methods. Final material grade, size, pressure drop, capacity, efficiency, flooding margin, liquid distribution, support design and mechanical arrangement require complete process data and engineering confirmation.
Project Inputs · Packing Tool Build 1.1.1
1. Project Information
2. Tower Data
Use this input when all beds have the same height. For unequal bed heights, calculate each bed separately or enter the total height as one bed.
Typical preliminary allowance: 3–5%
3. Packing Selection
Enter bulk density, not solid material density.
Required only for packing weight calculation. Leave blank if not confirmed.
Engineering Results
Recommended Packing
Enter project data and click Analyze Project.
| Option | Recommendation | Engineering Decision Guide |
|---|
Volume & Weight Estimate
Cross-sectional Area—
Theoretical Volume—
Purchase Volume—
Estimated Packing Weight—
Preliminary Engineering Report
The generated report will appear here.