Clean honeycomb ceramic according to deposit type. Loose dust, organics and inorganic scale require different methods. Avoid uncontrolled high pressure, impact and chemically aggressive cleaners that can damage thin ceramic channels.

Excessive gaps between honeycomb ceramic blocks allow low-resistance gas bypass and reduce effective heat-transfer volume. Installation must control joint and perimeter gaps while still allowing appropriate thermal expansion.

RTO honeycomb blocks can crack from thermal gradients, uneven bearing, impact, tight installation or fouling-induced temperature imbalance. Diagnose the location and fracture pattern before assuming the ceramic material itself was inadequate.

Silica scale and particles can rapidly restrict small honeycomb channels. In fouling service, larger passages or anti-blocking ceramic geometry may provide better long-term RTO performance even if nominal surface area is lower.

Cordierite is valued for low thermal expansion, while cordierite-mullite formulations can provide a different balance of thermal stability and strength. Select the material from actual RTO temperature cycling and mechanical requirements rather than from material name alone.