Mist eliminator commissioning should verify installation, orientation, edge sealing, drainage, differential pressure, operating load, and downstream carryover. Recording a clean baseline under known process conditions provides essential data for future diagnosis and maintenance.

Fouling creates a persistent physical restriction, while hydraulic flooding is caused by temporary liquid holdup and often improves when gas or liquid load is reduced. Trend behavior and shutdown inspection help distinguish the two.

Salt-bearing droplets can crystallize inside a mist eliminator as water evaporates and concentration increases. Fine mesh can plug rapidly, so drainage, geometry, wash strategy, pressure-drop trends, and salt solubility should be considered together.

Downstream liquid may come from mist carryover or from vapor condensation after the gas leaves the separator. Temperature profile, first wet location, load dependence, and liquid composition can help distinguish the two mechanisms.

Graded-density wire mesh demisters use different mesh structures through the pad thickness so that open upstream layers handle heavy liquid loading while denser downstream layers provide finer polishing. The design can improve hydraulic balance compared with one uniform mesh grade.